Industrial brush indispensable in modern industrial production, especially in the metal surface treatment above, is the necessary equipment for some mechanical equipment, to promote the development of industrial production plays a crucial auxiliary role.

Industrial brushes used in metal surface treatment of the situation, the following general situation:

First, the rough surface of metal processing, such as grinding, Mao Mao, rust, dust and so on;
Second, the metal surface cleaning, such as parts cleaning, decontamination, degreasing;
Third, the industrial brush is used to metal surface finishing, grinding, burrs, polishing.

Combined with the role of industrial brushes above, we must request the selection of wire brushing must be reasonable and appropriate. The correct choice of industrial brush wire, we must first study the physical properties of the material being processed, such as the surface finish of the material, hardness, etc. to determine the selection of brush wire material; followed by working conditions, select the appearance of the brush; Finally, the process parameters to determine Brush specifications and speed. Under normal circumstances, the greater the circular brush diameter, the better. In the same diameter conditions, the shorter wire brush, the grinding force is stronger, the longer the wire brush, the grinding force is weak.

If the use of industrial brush does not achieve the desired results, depending on the circumstances, to take some measures.

The first case is weak brush, you can consider the use of large diameter brush or increase the speed to increase the line speed, you can also reduce the length of the wire, in addition, switch to thick wire brush can also try.
The second case is brushing too strong, in this case, you can use a small diameter wire brush or reduce the speed to reduce the linear speed, or increase the length of industrial brushes, you can also switch to a thin wire diameter wire.